Product categories

Advice

We only sell products we know about and believe in.

Prices

Trade prices on all products, recently manufactured and in stock.

Delivery

Clear despatch times and next day delivery to most of the UK.

Service

We supply data sheets and application guides with every order.

Primers

Jotun's primers are used across the globe to protect some of the world's most iconic structures (including the Eiffel Tower and Burj Khalifa) and provide unrivalled corrosion protection.

Jotun's range of two-pack epoxy primers protect millions of square meters of steel worldwide and balance the need for effective corrosion protection with excellent application properties and a demanding budget.


For more information or for a detailed Jotun paint specification please contact us.



NEW PRODUCT

The best way to ensure primers are applied in the required thicknesses and with the correct number of coats is to use a Wet Film Gauge and to use different colours between coats (so you can see where you have been). However, if you are only ordering one tin of primer, we can now supply some tint that you can use to change the colour of your primer to differentiate between coats.

Jotamastic Range

Jotun's range of Jotamastic epoxy primers are amongst the best in the world and have been leading the way in corrosion protection for over 25 years. The extensive range of Jotamastic coatings has been developed to provide a variety of solutions for repair and maintenance. A Jotamastic anticorrosive system can be tailor-made to meet specific requirements for exposure, durability and cost.

SML Protective Coatings combine expert technical knowledge with next day delivery to ensure that projects are completed to the highest standard and on time. If you would like more information on which Jotamastic product is best for your situation please contact us.

Jotamastic 80 gives excellent two-pack epoxy corrosion protection for steel. It is a more economical version of the market leading Jotamastic 87.

From £37.95

Jotamastic 80 gives excellent two-pack epoxy corrosion protection for steel. It is a more economical version of the market leading Jotamastic 87. This product is suitable for application at temperatures below 10°C.

From £39.95

The ultimate in corrosion protection for steel structures. Jotamastic 87 is the world's best known maintenance coating.

From £42.95

PRICE
REDUCED

The ultimate in corrosion protection for steel structures. Jotamastic 87 is the world's best known maintenance coating.

From £45.95

The ultimate in corrosion protection for steel structures. Jotamastic 87 is the world's best known maintenance coating.

From £42.95

The ultimate in corrosion protection for steel structures Jotamastic 87 is the world's best known maintenance coating.

From £45.95

A two-pack surface tolerant, abrasion resistant, high solids, polyamine cured epoxy mastic coating which can be applied in high and low film thickness. It is available in a wide range of colours.

From £52.50

A two-pack surface tolerant, abrasion resistant, high solids, polyamine cured epoxy mastic coating which can be applied in high and low film thickness. It is available in a wide range of colours.

From £52.50

SOLVENT
FREE

A two pack solvent-free epoxy mastic coating, specially designed for areas where optimum surface preparation is not possible. It is a high build product, and provides long lasting protection in environments with high corrosivity. It can be used as primer, mid coat, finish coat or as a single coat system. Suitable for properly prepared carbon steel and aged coating surfaces. Well suited for early immersion. It is primarily designed for maintenance and repair, on areas such as outside hulls, exterior and interior areas, offshore environments including splash zones, refineries, bridges, buildings, and general structural steel. It is available in grey, red and off-white, in a 14.67 litre pack with Standard Comp B. We recommend the Wintergrade (16L) version if painting outside between September & April.

From £185.00

PRICE
REDUCED

Jotamastic Smartpack Aluminium is a two-pack surface tolerant high solids epoxy primer coat with Aluminium pigment for improved barrier effect, for use on steel & other substrates. Specially designed for application by brush & roller, 1-1 mixing ratio for easy use & reduced wastage, & ideal for areas where optimum surface preparation is not possible. Can be used as primer, mid or finish coat, & is suitable for properly prepared carbon steel, galvanised steel, stainless steel, aluminium, concrete & other substrates. 10 litre pack.

From £85.00

PRICE
REDUCED

Jotamastic Smartpack is a two-pack surface tolerant high solids epoxy primer coat for use on steel.

From £85.00

NEW
PRODUCT

Use to differentiate between coats. Apply a small amount of this tint so the second coat shows as a different colour to the first coat thereby ensuring even coverage and better protection.

From £2.95

Penguard Range

The Penguard range from Jotun contains several pure epoxy primers that offer excellent corrosion protection, fast curing and a professional finish. The range includes Penguard Express, Penguard Primer and Penguard HB all of which are available for next day delivery.

For information on which product is most suitable for your project, paint specifications and quotes please contact us.

Penguard Clear Sealer is a transparent two-pack epoxy sealer with excellent waterproofing qualities. It is ideal for waterproofing timber and as a primer on to masonry and concrete.

From £39.95

Penguard Express is a fast drying, high solids, two-pack epoxy coating which may be applied in high film thicknesses and at low temperatures.

From £35.95

Penguard Express MIO is a fast drying, high solids, two-pack epoxy coatings which can be applied at high film thicknesses and at low temperatures. It contains micaceous iron oxide for increased barrier effect.

From £39.95

Penguard Express ZP is a fast drying, high solids, two-pack epoxy coating system which can be applied at high film thicknesses and at lower temperatures.

From £39.95

PRICE
REDUCED

Penguard FC is a high build, two-pack epoxy coating that can be used as a topcoat in an epoxy paint system or as a single coat system on steel and concrete.

From £39.95

A high build, two-pack pure epoxy primer

From £34.95

PRICE
REDUCED

Penguard HSP is a fast drying, high solids two-pack epoxy coating. Penguard HSP provides corrosion protection to steel in an urban and industrial atmosphere.

From £110.00

Penguard Low Temperature Additive is an additive that will assist drying and curing of Penguard paints at low temperatures (down to 2ºC).

From £4.25

A two-pack epoxy primer certified not to spread surface flame. It should be used as a first coat on aluminium and galvanised steel.

From £38.00

NEW
PRODUCT

Use to differentiate between coats. Apply a small amount of this tint so the second coat shows as a different colour to the first coat thereby ensuring even coverage and better protection.

From £2.95

Barrier Range

Jotun's Barrier range consists of several zinc rich epoxy primers. These high performance coatings provide increased corrosion protection when applied directly on to blast primed steel. All the Barrier products contain high levels of zinc (ranging from 63% through to 90%). The zinc rich epoxy primers should then be overcoated with a compatible high build epoxy.

A typical Jotun paint system would be to apply a coat of zinc rich Barrier, followed by a product in the Jotamastic Range and then to use a two-pack polyurethane topcoat from the Hardtop Range.

If you would like advice on a suitable Jotun paint system for your project or would like to know which Barrier product is right for you please contact us.

86%
ZINC

A two-pack, zinc rich, epoxy primer which meets NORSOK approval. Barrier is used in combination with other primers to further improve corrosion protection. Total zinc content = 86%.

From £74.95

A two-pack epoxy primer that contains a high precentage of zinc that is designed for application to blast cleaned steel. Barrier 77 should be used in combination with other advanced coatings to further increase corrosion protection.

From £129.95

FREE
DELIVERY

Barrier is a two-pack, zinc rich, epoxy primer. Barrier is used in combination with other primers to further improve corrosion protection. Total zinc content = 90%

From £159.95

PRICES
REDUCED

A zinc primer for use on blast cleaned steel. Barrier ZEP should be used in combination with other advanced coatings to improve corrosion protection still further.

From £89.95

NEW
PRODUCT

Use to differentiate between coats. Apply a small amount of this tint so the second coat shows as a different colour to the first coat thereby ensuring even coverage and better protection.

From £2.95

Alkydprimer is a single pack oil based primer/undercoat for use on steel and aluminium surfaces where Pilot II is the desired finish coat.

From £25.95

NEW
STOCK

A bitumen based protective coating that is extremely waterproof and easy to apply. Ballastic Black is for use on steel behind insulation, cofferdams, water tanks (non-potable), concrete and similar materials as damp-proof coating. It is also widely used below the waterline on canal boats. Can be applied on bare steel or over existing coatings - Ballastic Black offers excellent protection at an excellent price.

From £29.95

NEW
PRODUCT

The one-product solution! Conseal Touch Up Aluminium is a single pack, high build, self-priming topcoat which can be applied direct to metal. Available in 5 litre & 20 litre sizes.

From £37.95

FREE
DELIVERY

A single pack coating that provides protection to steel exposed to extreme high and/or low temperatures. Jotatemp 650 can operate in dry temperatures ranging from cryogenic (-185°C) to above 650°C. Available in 5 Litre cans.

From £365.00

Pilot QD Primer is a single pack, fast drying alkyd based primer with zinc phosphate as an active corrosion preventing pigment. It is for use on steel or aluminium structures in moderate non-aggressive environments. It can also be used as a primer on bare steel under the Jotun Steelmaster range of intumescent paints.

From £25.95

NEW
PRODUCT

Use to differentiate between coats. Apply a small amount of this tint so the second coat shows as a different colour to the first coat thereby ensuring even coverage and better protection.

From £2.95

Jotun Balloxy HB Light is a two-pack, high build epoxy coating for use in ballast tanks, cofferdams and in areas with condensation where blast cleaning isn't always possible.

From £120.00

Jotun Baltoflake is a quick curing, abrasion resistant polyester coating that is reinforced with glass flake and provide long term corrosion protection. It is ideal for areas subject to extreme mechanical wear.

From £295.00

HEAT
RESISTANT

Two pack epoxy coating, heat resistant up to 205º C. Can be applied on hot substrates up to 150º C. Offers excellent corrosion protection for surfaces operating at elevated temperatures where long corrosion protection is required. Can be used as primer, mid coat or finish coat in atmospheric environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel, and aluminium substrates. Available in Aluminium or Light grey, in an 18.8 litre pack.

From £141.00

PRICE
REDUCED

Jotacote Universal is a high build, abrasion resistant two-pack epoxy primer that can be applied at high film thickness. It can be used both as a primer and finish coat.

From £149.95

Cures underwater, the ideal primer for steel in splash zones & tidal areas, & wide colour choice when used as a topcoat.

From £55.95

NEW
PRODUCT

Use to differentiate between coats. Apply a small amount of this tint so the second coat shows as a different colour to the first coat thereby ensuring even coverage and better protection.

From £2.95

Muki EPS is a multi-functional quick drying primer that contains iron oxide pigment. It is a two-pack epoxy and allows for fair cutting and welding.

From £95.00

A two-pack, modified low zinc ethyl silicate shopprimer that has been designed to allow for optimum cutting and welding. Gives reduced weld defects/backburning.

From £120.00

A two-pack primer consisting of a silicate solution and zinc paste. It reduces exposure to fumes dring welding & cutting compared with high zinc primers. The dry film contains 50% zinc by weight.

From £137.50

NEW
PRODUCT

Use to differentiate between coats. Apply a small amount of this tint so the second coat shows as a different colour to the first coat thereby ensuring even coverage and better protection.

From £2.95