Penguard HSP is a fast drying, high solids two-pack epoxy coating. Penguard HSP provides corrosion protection to steel in an urban and industrial atmosphere.
Penguard HSP is ideal for use where a fast dry-to-recoat and/or a fast dry-to-handle time is required.
Available in 20 litre pack only.
Standard: Penguard FC
Premium: Hardtop AX
Eco: Hardtop CA
Other topcoat options available. Please call us for advice.
|Jotun No 17
|Pot life @ 23 C
|Drying time @ 23 C:
|Through dry in 3 hours
|Curing time @23 C
|Typical 5.6 sq metres per litre
|Airless spray, brush recommended for stripe coating & small areas, care must be taken to achieve the desired dry film thickness.
Call us on 01285 862132
Thinners No. 17 is the solvent base for Jotun's Jotamastic, Penguard and Barrier range.
Penguard Topcoat is a glossy pure epoxy topcoat. It should only be used in situations where there is limited exposure to Ultra Violet light or where cosmetic appearance over a period of time is not important.
A two-pack glossy polyurethane topcoat with excellent gloss and colour retention. Suitable for brush/roll as well as spray application. Hardtop AX has good chemical resistance and can be used in aggressive atmospheric environments.
A two-pack acrylic-epoxy, isocyanate free topcoat with excellent gloss and colour retention.
Thermobonded and solvent resistant for reduced fibre shedding. Available in various lengths and pack sizes. Ideal uses - Epoxy resin,floor & solvent based paints