This is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, high solids, high build
product. It is aluminium pigmented for improved barrier effect. Specially designed for areas where optimum
surface preparation is not possible or desired. Provides long lasting protection in environments with high
corrosivity. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed
environments. Suitable for properly prepared carbon steel and aged coating surfaces. It can be applied at sub
zero surface temperatures.
|Jotun Thinners No. 17 or SML Epoxy Thinner
|Pot life @ 23°C
|1.5 hours maximum
|No. of recommended coats
|1 coat followed by 2 coats Jotamastic 87 in a colour
|Dry to overcoat @ 23°C
|Curing time @ 23°C
|6 to 8 m² per litre
|Brush, roller or high pressure airless spray
Thinners No. 17 is the solvent base for Jotun's Jotamastic, Penguard and Barrier range.
This is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, high solids, high build product. Specially designed for areas where optimum surface preparation is not possible or desired.
A two-pack glossy polyurethane topcoat with excellent gloss and colour retention. Suitable for brush/roll as well as spray application. Hardtop AX has good chemical resistance and can be used in aggressive atmospheric environments.
Thermobonded and solvent resistant for reduced fibre shedding. Available in various lengths and pack sizes. Ideal uses - Epoxy resin,floor & solvent based paints