Excellent protection in less severe environments - Low film thickness version of Jotamastic 87. Available in off white, grey, black and red and with the inclusion of aluminium flakes in Aluminium and Aluminium red-toned.
A two-pack, zinc rich, epoxy primer which meets NORSOK approval. Barrier is used in combination with other primers to further improve corrosion protection. Total zinc content = 86%.
This is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, high solids, high build product. It is aluminium pigmented for improved barrier effect.
Jotamastic Smartpack is a two-pack surface tolerant high solids epoxy primer coat for use on steel.
Hardtop XP is a high solids, high performance polyurethane topcoat with excellent spray properties and improved properties for application by brush and roller – ensuring good result and appreciated by all applicators.
Pilot II is a glossy, single pack oil based topcoat for use above the waterline. Over a suitable primer it can be used on a wide range of substrates.
Penguard Topcoat is a glossy pure epoxy topcoat. It should only be used in situations where there is limited exposure to Ultra Violet light or where cosmetic appearance over a period of time is not important.
Pioner Topcoat is a single pack semi-gloss acrylic topcoat with good hiding properties and colour retention.
Pilot QD Primer is a single pack, fast drying alkyd based primer with zinc phosphate as an active corrosion preventing pigment. It is for use on steel or aluminium structures in moderate non-aggressive environments. It can also be used as a primer on bare steel under the Jotun Steelmaster range of intumescent paints.
This is a rough guide only. The amount of paint required is based on average conditions and application methods. Please check the individual product spreading rates and application guides if you require more precise information. You may need to change the Product type for each area you wish to paint i.e. the amount of paint required for a given area is not a combined total of primer and antifouling but the amount required of each product. The protection factor for all primers and antifouling is two coats for ‘good’ and three coats for ‘best’. The amount of paint applied with each coat varies considerably on the method of application so this is just a rough guide.
To calculate the area for boats use the Paint Area Calculator For Boats on our Marine Paint website HERE.