A two-pack solvent-free epoxy coating, a general purpose tank lining with good chemical resistance. It can be used as primer, mid or finish coat, on steel, galvanised & stainless steel, and concrete substrates.
Typical uses:
Marine: Potable water, grey watre & crude oil tanks.
Protective: Internal lining for offshore, onshore and buried tanks & pipes. Recommended for offshore environments, including splash zones, refineries, power plants, bridges, buildings, mining equipment and general structural steel.
Available in Red or White, in 15 litre packs. Note; Colours are approximations and are not matched. Slight batch deviations will be observed.
Feature | Details |
---|---|
Typical DFT, tank coating | 0.2 mm |
Typical DFT, internal pipe coating | 0.2 mm |
Thinner | See Data Sheet / Application guide |
Surface preparation, carbon steel | Minimum Sa 2.5 |
Drying time at 23° C | Touch dry, 6 hours |
Dried / cured for service at 23° C | 7 days |
Application | Airless spray recommended |