Penguard HSP is a fast drying, high solids two-pack epoxy coating. Penguard HSP provides corrosion protection to steel in an urban and industrial atmosphere.
Penguard HSP is ideal for use where a fast dry-to-recoat and/or a fast dry-to-handle time is required.
Available in 20 litre pack only.
Recommended topcoats:
Standard: Penguard FC
Premium: Hardtop AX
Eco: Hardtop CA
Other topcoat options available. Please call us for advice.
Feature | Details |
---|---|
Water resistance: | Very good |
Thinner: | Jotun No 17 |
Solvent resistance: | Excellent |
Pot life @ 23 C | 2 hours |
Flexibility: | Good |
Drying time @ 23 C: | Through dry in 3 hours |
Curing time @23 C | 4 days |
Coverage: | Typical 5.6 sq metres per litre |
Application method: | Airless spray, brush recommended for stripe coating & small areas, care must be taken to achieve the desired dry film thickness. |
Call us on 01285 862132
Thinners No. 17 is the solvent base for Jotun's Jotamastic, Penguard and Barrier range.
Penguard Topcoat is a glossy pure epoxy topcoat. It should only be used in situations where there is limited exposure to Ultra Violet light or where cosmetic appearance over a period of time is not important.
A two-pack glossy polyurethane topcoat with excellent gloss and colour retention. Suitable for brush/roll as well as spray application. Hardtop AX has good chemical resistance and can be used in aggressive atmospheric environments.
A two-pack acrylic-epoxy, isocyanate free topcoat with excellent gloss and colour retention.
Thermobonded and solvent resistant for reduced fibre shedding. Available in various lengths and pack sizes. Ideal uses - Epoxy resin,floor & solvent based paints