A one-component styrene modified oxidatively drying alkyd coating. It is heat resistant up to 250 °C. Can be used as an exterior aluminium finish usually within an alkyd system. Can be used as a primer, mid coat or finish coat in atmospheric environments. Suitable for properly prepared carbon steel and aluminium substrates.
| Feature | Details |
|---|---|
| Thinner: | Jotun Thinner No 2 or SML Alkyd Thinner |
| No. of recommended coats: | 2 @ 25 microns |
| Name | Value |
| Gloss: | Aluminium sheen |
| Flexibility: | Good |
| Drying time @ 23°C: | 30 minutes |
| Dry to recoat, minimum @ 23°C: | 8 hours |
| Coverage: | 18sq metres per litre |
| Application method: | Airless or conventional spray. Brush recommended for stripe coating & small areas, care must be taken to achieve the specified dry film thickness. |
| Abrasion resistance: | Fair |
Follow us on:
Use the form below or send an email to info@smlpaints.co.uk
