Product categories

Advice

We only sell products we know about and believe in.

Prices

Trade prices on all products, recently manufactured and in stock.

Delivery

Clear despatch times and next day delivery to most of the UK.

Service

We supply data sheets and application guides with every order.

Yellow (Jotun)

The following Jotun products are available in Yellow .

Conseal Touch-Up is a single pack, high build acrylic self-priming topcoat which can be applied directly onto almost any steel construction. It is quick drying and available in a huge range of colours.

From £33.95

Hardtop AS has been discontinued and replaced by the superior Hardtop AX.

Call for prices

A two-pack glossy polyurethane topcoat with excellent gloss and colour retention. Suitable for brush/roll as well as spray application. Hardtop AX has good chemical resistance and can be used in aggressive atmospheric environments.

From £59.95

A two-pack acrylic-epoxy, isocyanate free topcoat with excellent gloss and colour retention.

From £59.95

Hardtop Flexi is a high solids, glossy two-pack polyurethane topcoat with good gloss and colour retention and excellent flexibility. Hardtop Flexi also has excellent impact resistance.

From £49.95

Hardtop HB is a satin finish two pack polyurethane topcoat with excellent colour retention.

From £49.95

Hardtop Optima is a two-pack isocyanate-free polysiloxane topcoat with outstanding gloss and colour retention. It is available in a wide range of colours and in various pack sizes. The best commercial topcoat available from Jotun.

From £90.95

Hardtop XP is a high solids, high performance polyurethane topcoat with excellent spray properties and improved properties for application by brush and roller – ensuring good result and appreciated by all applicators.

From £49.95

A two-pack surface tolerant, abrasion resistant, high solids, polyamine cured epoxy mastic coating which can be applied in high and low film thickness. It is available in a wide range of colours.

From £50.00

A two-pack surface tolerant, abrasion resistant, high solids, polyamine cured epoxy mastic coating which can be applied in high and low film thickness. It is available in a wide range of colours.

From £50.00

Cures underwater, the ideal primer for steel in splash zones & tidal areas, & wide colour choice when used as a topcoat.

From £55.95

Penguard Express is a fast drying, high solids, two-pack epoxy coating which may be applied in high film thicknesses and at low temperatures.

From £35.95

Penguard FC is a high build, two-pack epoxy coating that can be used as a topcoat in an epoxy paint system or as a single coat system on steel and concrete.

From £39.95

Penguard Topcoat is a glossy pure epoxy topcoat. It should only be used in situations where there is limited exposure to Ultra Violet light or where cosmetic appearance over a period of time is not important.

From £48.45

Pilot ACR is a high build, quick drying acrylic topcoat. It can be applied as a single coat system or over a suitable primer and at temperatures as low as minus 15°C.

From £49.95

Pilot ACR in Base 2 and 6 so can be tinted to various midtone colours and oranges. Available for just £25 + VAT per pack.

From £25.00

Pilot II is a glossy, single pack oil based topcoat for use above the waterline. Over a suitable primer it can be used on a wide range of substrates.

From £33.95

An advanced waterborne acrylic emulsion coating for both interior & exterior use. It is fast-drying, and can be applied down to 10° C. It has a gloss finish, with very good gloss retention. It is certified not to spread surface flames, & meets the LEED v4 requirements for VOC content & emissions.

From £49.95

Pioner Topcoat is a single pack semi-gloss acrylic topcoat with good hiding properties and colour retention.

From £33.95

Ultra Topcoat has been discontinued. An alternative product is Pilot ll.

Call for prices

WaterFine Topcoat has been discontinued. An alternative product is Pilot WF.

Call for prices