Kit consists of 1 x 7kg tub Strippit, 1.8m x 25m roll of plastic film with self adhesive edge, plastic scraper to remove antifouling.
STRIPPIT antifouling remover has been designed to remove old antifouling from GRP & wooden craft with the minimum of effort without damaging the gel coat or epoxy coatings. (Do not use on bare timber) It is effective on most types of self polishing and leaching antifouling.
STRIPPIT is a water based caustic gel which is applied to the hull, overlaid with the self-adhesive film, left for 12-24 hours and removed by scraping and washing with water - hot water or steam is particularly effective.
STRIPPIT was awarded a BEST BUY AWARD in Motor Boats Monthly magazine.
Available in 7Kg containers.
1. Apply Strippit paste to hull
2. Stick the self-adhesive sheet just above the waterline mark, unfold and allow it to cover the area where Strippit has been applied (Folds down 1.8m).
3. Leave overnight and peel off the sheet with the scraper and wash to remove any residue. Repeat if necessary.
Scratch resistant safety Goggles with clear panoramic lens and flexible PVC frame and reduced risk of fogging
Quality mix of natural and synthetic bristle for use with all paints and varnishes Excellent paint loading for great coverage Flagged filaments for smooth paint release and finish Kaiser shaped handle for great control.
Aluminium Oxide Sandpaper in 5m rolls, available in a choice of 4 grades - 60 grit, 120 grit, 180 grit, and 240 grit, at an excellent price! 115mm width is ideal for machine sanders.
High Tech masking tape developed to give excellent barrier properties, eliminating paint bleed to ensure the ultimate in sharp paint lines and guaranteeing a professional finish every time. Suitable for use on delicate surfaces - always try a small area first. Available in 1", 1.5" and 2" widths.
Follow us on:
Use the form below or send an email to info@smlpaints.co.uk
