We only sell products we know about and believe in.
Trade prices on all products, recently manufactured and in stock.
Clear despatch times and next day delivery to most of the UK.
We supply data sheets and application guides with every order.
The ideal primer for steel in splash zones and tidal areas, this 2 pack epoxy primer can be fully immersed within an hour of application, as it continues to cure under water. It will even cure at temperatures as low as 0C. Marathon 500 is surface tolerant, offers excellent abrasion resistance, & can be applied at high film thicknesses (up to 500 microns per coat). It offers good solvent & chemical resistance, & good flexibility. It can be used alone as it has a glossy finish & good colour retention (for an epoxy) or it can be used in combination with a topcoat. It is also available in a wide variety of colours. Please note that exposure to water soon after application may affect the coating surface and give a whitish appearance, especially on dark and strong colours. This will not however affect the protective properties. Typical paint system: 1 x 500 micron coat or 2 x 250 micron coats (dry film thicknesses).
Jackets, Jetties, Pilings, Offshore Wind, Condesate Boxes, Cassons, Helidecks or any harsh environment.
Available in 5 litre (nom) & 18 litre (nom) sizes.
|Substrates||Bare or shopprimed steel|
|Application||Airless spray recommended|
|Induction time||10 minutes|
|Pot life||1.5 hours at 23 C|
|Surface dry at 23 C||4 hours|
|Through dry at 23 C||8 hours|
|Curing time at 23 C||5 days|
Choose colour first. Any size options will then be available.