A two-pack conductive epoxy coating, with good chemical resistance. Suitable for properly prepared carbon steel and stainless steel substrates. Can be used as primer, mid-coat or finish coat in atmospheric and immersed environments.
Typical use: Recommended as an internal lining for onshore and buried tanks where a conductive coating is required.
Available in 20 L pack, in Black only
| Feature | Details |
|---|---|
| Touch dry at 23 C | 3.5 hours |
| Thinner | Jotun No 23 |
| Surface preparation | Minimum Sa 2.5 |
| Pot life at 23 C | 8 hours |
| Induction time at 23 C | 30 minutes |
| Dried to overcoat at 23 C | Minimum 12 hours |
| Dried / cured for service at 23° C | 7 days |
| Application | Airless spray recommended |
Follow us on:
Use the form below or send an email to info@smlpaints.co.uk
