Pilot QD Primer is a fast drying alkyd based primer with zinc phosphate as an active corrosion preventing pigment.
It is for use on steel, aluminium or wooden substrates in moderate non-aggressive environments. It can also be used as a primer on bare steel under the Jotun Steelmaster range of intumescent paints.
It is fast drying and resistant against dry heat up to 120°C. Excellent also for touch-up priming.
Available in 5 litre & 20 litre sizes.
Recomended topcoats:
Standard: Pilot II
Premium: Lustre Gloss Silicone Alkyd
Eco: Pilot WF
Other finish coats available. Please call us for advice.
Feature | Details |
---|---|
Water Resistance | Good |
Touch Dry @ 23°C | 15 minutes |
Thinner | Jotun Thinners No. 7 or SML Xylene Thinner |
No. of recommended coats | 2 |
Flexibility | Good |
Dry to re-coat @ 23°C | 1.5 hours |
Coverage | 8 m² per litre |
Application Method | Brush, Roller or Airless Spray |
Pilot II is a glossy, single pack oil based topcoat for use above the waterline. Over a suitable primer it can be used on a wide range of substrates.
Pioner Topcoat is a single pack semi-gloss acrylic topcoat with good hiding properties and colour retention.
Thermobonded and solvent resistant for reduced fibre shedding. Available in various lengths and pack sizes. Ideal uses - Epoxy resin,floor & solvent based paints