A two pack solvent-free epoxy mastic coating, specially designed for areas where optimum surface preparation is not possible.It is a high build product, and provides long lasting protection in environments with high corrosivity. It can be used as primer, mid coat, finish coat or as a single coat system. Suitable for properly prepared carbon steel and aged coating surfaces.
It is primarily designed for maintenance and repair, on areas such as outside hulls, exterior and interior areas, offshore environments including splash zones, refineries, bridges, buildings, and general structural steel. Well suited for early immersion.
It is available in grey and red, in a 14.67 litre pack with Standard Comp B.
Recommended topcoats (above the water):
Standard: Penguard Topcoat
Premium: Hardtop AX
Eco: Hardtop CA
Other topcoat options available. Please call us for advice.
Feature | Details |
---|---|
Thinner | No 17 |
Dry to re-coat @ 23°C, standard Comp B | 16 hours |
Dry to overcoat @ 10°C, wintergrade Comp B | 23 hours |
Coverage | 6 m² per litre |
Application | Airless spray recommended, brush / roller for stripe coats & small areas |
Abrasion Resistance | Very Good |
Thinners No. 17 is the solvent base for Jotun's Jotamastic, Penguard and Barrier range.
Hardtop Optima is a two-pack isocyanate-free polysiloxane topcoat with outstanding gloss and colour retention. It is available in a wide range of colours. The best commercial topcoat available from Jotun.
A two-pack acrylic-epoxy, isocyanate free topcoat with excellent gloss and colour retention.
Thermobonded and solvent resistant for reduced fibre shedding. Available in various lengths and pack sizes. Ideal uses - Epoxy resin,floor & solvent based paints