We only sell products we know about and believe in.
Trade prices on all products, recently manufactured and in stock.
Clear despatch times and next day delivery to most of the UK.
We supply data sheets and application guides with every order.
Two pack epoxy coating, heat resistant up to 205º C. Can be applied on hot substrates up to 150º C. Offers excellent corrosion protection for surfaces operating at elevated temperatures where long corrosion protection is required. Can be used as primer, mid coat or finish coat in atmospheric environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel, and aluminium substrates. Available in Aluminium or Light grey, in an 18.8 litre pack.
Hardtop AS is a two-pack aliphatic polyurethane high gloss coating for use as topcoat on vessels and other marine structures: Super structures, decks, topsides and engine rooms. When applied over an epoxy mastic, it offers the ultimate protection against the elements.
Call for prices
Hardtop Pro is an isocyanate-free acrylic polysiloxane coating giving a high gloss finish. It offers excellent gloss & colour retention, very good chemical resistance, and easier application with brush & roller. It is a high solids topcoat (65%), and cures down to 0º C.
A 3 component epoxy coating giving the ultimate anti-skid surface. Suitable for primed metallic & concrete substrates. Approved to UK Defence Standard 80-134/1 for Royal Navy flight, hangar & weather decks. Can be used on helidecks, walkways, ramps, weigh bridge decks and decks in general where abrasion resistance and non-slip properties are required. Standard Comp B: 9 litre kit Wintergrade Comp B: 9.3 litre kit Available in several colours, all on Special order. See Manual, Data sheet & Application guide (under Guides tab below) for full details.
An advanced waterborne acrylic emulsion coating for both interior & exterior use. It is fast-drying, and can be applied down to 10° C. It has a gloss finish, with very good gloss retention. It is certified not to spread surface flames, & meets the LEED v4 requirements for VOC content & emissions.