Product categories

Advice

We only sell products we know about and believe in.

Prices

Trade prices on all products, recently manufactured and in stock.

Delivery

Clear despatch times and next day delivery to most of the UK.

Service

We supply data sheets and application guides with every order.

Grey (Jotun)

The following Jotun products are available in Grey .

A two-pack, zinc rich, epoxy primer which meets NORSOK approval. Barrier is used in combination with other primers to further improve corrosion protection. Total zinc content = 86%.

From £74.95

A two-pack epoxy primer that contains a high precentage of zinc that is designed for application to blast cleaned steel. Barrier 77 should be used in combination with other advanced coatings to further increase corrosion protection.

From £129.95

A zinc primer for use on blast cleaned steel. Barrier ZEP should be used in combination with other advanced coatings to improve corrosion protection still further.

From £89.95

Conseal Touch-Up is a single pack, high build acrylic self-priming topcoat which can be applied directly onto almost any steel construction. It is quick drying and available in a huge range of colours.

From £33.95

A high gloss, high quality topcoat, with very good levelling characteristics. Easy to apply by brush & roller, it is fast drying and has very good hiding power. Excellent gloss & colour retention. Available in 0.75 L only.

From £15.58

Hardtop AS is a two-pack aliphatic polyurethane high gloss coating for use as topcoat on vessels and other marine structures: Super structures, decks, topsides and engine rooms. When applied over an epoxy mastic, it offers the ultimate protection against the elements.

Call for prices

A two-pack glossy polyurethane topcoat with excellent gloss and colour retention. Suitable for brush/roll as well as spray application. Hardtop AX has good chemical resistance and can be used in aggressive atmospheric environments.

From £59.95

A two-pack acrylic-epoxy, isocyanate free topcoat with excellent gloss and colour retention.

From £59.95

Hardtop Flexi is a high solids, glossy two-pack polyurethane topcoat with good gloss and colour retention and excellent flexibility. Hardtop Flexi also has excellent impact resistance.

From £49.95

Hardtop HB is a satin finish two pack polyurethane topcoat with excellent colour retention.

From £49.95

Hardtop Optima is a two-pack isocyanate-free polysiloxane topcoat with outstanding gloss and colour retention. It is available in a wide range of colours and in various pack sizes. The best commercial topcoat available from Jotun.

From £129.95

Hardtop Pro is an isocyanate-free acrylic polysiloxane coating giving a high gloss finish. It offers excellent gloss & colour retention, very good chemical resistance, and easier application with brush & roller. It is a high solids topcoat (65%), and cures down to 0º C.

From £39.95

Hardtop Pro is an isocyanate-free acrylic polysiloxane coating giving a high gloss finish. It offers excellent gloss & colour retention, very good chemical resistance, and easier application with brush & roller. It is a high solids topcoat (65%), and cures down to 0º C. Clearance prices on some tins that are at or past the sell-by date, so fabulous value for money! See main product page under Topcoats for full product information.

From £39.95

Hardtop XP is a high solids, high performance polyurethane topcoat with excellent spray properties and improved properties for application by brush and roller – ensuring good result and appreciated by all applicators.

From £49.95

A 3 component epoxy coating giving the ultimate anti-skid surface. Suitable for primed metallic & concrete substrates. Approved to UK Defence Standard 80-134/1 for Royal Navy flight, hangar & weather decks. Can be used on helidecks, walkways, ramps, weigh bridge decks and decks in general where abrasion resistance and non-slip properties are required. Standard Comp B: 9 litre kit Wintergrade Comp B: 9.3 litre kit Available in several colours, all on Special order. See Manual, Data sheet & Application guide (under Guides tab below) for full details.

From £120.00

Jotacote Universal is a high build, abrasion resistant two-pack epoxy primer that can be applied at high film thickness. It can be used both as a primer and finish coat.

From £149.95

A single pack, fast drying, glossy topcoat offering durability not normally associated with alkyd floor products. It is deal for foot traffic and light duty floors and is available in a huge range of colours.

From £34.95

A two-pack epoxy floor coating offering good chemical resistance, durability and it is available in a wide range of colours.

From £49.95

Jotamastic 80 gives excellent two-pack epoxy corrosion protection for steel. It is a more economical version of the market leading Jotamastic 87.

From £39.95

Jotamastic 80 gives excellent two-pack epoxy corrosion protection for steel. It is a more economical version of the market leading Jotamastic 87. This product is suitable for application at temperatures below 10°C.

From £41.95

The ultimate in corrosion protection for steel structures. Jotamastic 87 is the world's best known maintenance coating.

From £44.95

The ultimate in corrosion protection for steel structures Jotamastic 87 is the world's best known maintenance coating.

From £47.95

A two-pack surface tolerant, abrasion resistant, high solids, polyamine cured epoxy mastic coating which can be applied in high and low film thickness. It is available in a wide range of colours.

From £52.50

A two-pack surface tolerant, abrasion resistant, high solids, polyamine cured epoxy mastic coating which can be applied in high and low film thickness. It is available in a wide range of colours.

From £52.50

A two pack solvent-free epoxy mastic coating, specially designed for areas where optimum surface preparation is not possible. It is a high build product, and provides long lasting protection in environments with high corrosivity. It can be used as primer, mid coat, finish coat or as a single coat system. Suitable for properly prepared carbon steel and aged coating surfaces. Well suited for early immersion. It is primarily designed for maintenance and repair, on areas such as outside hulls, exterior and interior areas, offshore environments including splash zones, refineries, bridges, buildings, and general structural steel. It is available in grey, red and off-white, in a 14.67 litre pack with Standard Comp B. We recommend the Wintergrade (16L) version if painting outside between September & April.

From £185.00

Jotamastic Smartpack is a two-pack surface tolerant high solids epoxy primer coat for use on steel.

From £85.00

A single pack coating that provides protection to steel exposed to extreme high and/or low temperatures. Jotatemp 650 can operate in dry temperatures ranging from cryogenic (-185°C) to above 650°C. Available in 5 Litre cans.

From £365.00

Cures underwater, the ideal primer for steel in splash zones & tidal areas, & wide colour choice when used as a topcoat.

From £55.95

A two-pack primer consisting of a silicate solution and zinc paste. It reduces exposure to fumes dring welding & cutting compared with high zinc primers. The dry film contains 50% zinc by weight.

Call for prices

Penguard Express is a fast drying, high solids, two-pack epoxy coating which may be applied in high film thicknesses and at low temperatures.

From £35.95

Penguard Express MIO is a fast drying, high solids, two-pack epoxy coatings which can be applied at high film thicknesses and at low temperatures. It contains micaceous iron oxide for increased barrier effect.

From £39.95

Penguard Express ZP is a fast drying, high solids, two-pack epoxy coating system which can be applied at high film thicknesses and at lower temperatures.

From £39.95

Penguard FC is a high build, two-pack epoxy coating that can be used as a topcoat in an epoxy paint system or as a single coat system on steel and concrete.

From £39.95

A high build, two-pack pure epoxy primer

From £34.95

Penguard HSP is a fast drying, high solids two-pack epoxy coating. Penguard HSP provides corrosion protection to steel in an urban and industrial atmosphere.

From £110.00

A two-pack epoxy primer certified not to spread surface flame. It should be used as a first coat on aluminium and galvanised steel.

From £38.00

Penguard Topcoat is a glossy pure epoxy topcoat. It should only be used in situations where there is limited exposure to Ultra Violet light or where cosmetic appearance over a period of time is not important.

From £48.45

Pilot ACR is a high build, quick drying acrylic topcoat. It can be applied as a single coat system or over a suitable primer and at temperatures as low as minus 15°C.

From £49.95

Pilot II is a glossy, single pack oil based topcoat for use above the waterline. Over a suitable primer it can be used on a wide range of substrates.

From £33.95

An advanced waterborne acrylic emulsion coating for both interior & exterior use. It is fast-drying, and can be applied down to 10° C. It has a gloss finish, with very good gloss retention. It is certified not to spread surface flames, & meets the LEED v4 requirements for VOC content & emissions.

From £49.95

Pioner Topcoat is a single pack semi-gloss acrylic topcoat with good hiding properties and colour retention.

From £33.95

Jotaproff Prima Clean 10 is a scrubbable & durable acrylic interior emulsion, which can be used as an undercoat or topcoat where a silky matt finish is required. Excellent for areas which require a hard-wearing, stain-resistant and scrubbable coating, such as schools, entrance halls etc. Tough stains such as coffee, crayons, juice, red wine, grass, and food are easily wiped away to leave a ‘good as new’ surface, time and time again. Even after prolonged scrubbing, walls remain spot free and show no sign of discolouration or surface deterioration. Available in 10 litre size. Can be applied to plaster, concrete, mortar, plaster boards, glassfibre, and wallpapers.

From £75.00

A two-pack moisture cured inorganic zinc ethyl silicate coating, specially designed as a tank coating and lining with excellent cargo resistance. To be used as a single coat system only, in atmospheric and immersed environments.

From £199.95

A quick drying and glossy acrylic modified alkyd topcoat that contains aromatic solvents.

Call for prices

Call for prices