Product categories

Advice

We only sell products we know about and believe in.

Prices

Trade prices on all products, recently manufactured and in stock.

Delivery

Clear despatch times and next day delivery to most of the UK.

Service

We supply data sheets and application guides with every order.

CLEARANCE

These items are reduced in price for quick sale. They may be end-of-lines, out of date, damaged or ordered by mistake. Please read the description of the product for full details. These items can only be purchased by calling 01285 862132 as there is limited stock.

DON'T FORGET THE THINNERS, ACCESSORIES AND ANY BRUSHES AND ROLLERS YOU MAY NEED!

Reduced!

A two-pack epoxy primer that contains a high percentage of zinc that is designed for application to blast cleaned steel. Barrier 77 should be used in combination with other advanced coatings to further increase corrosion protection.

From £116.95

TO
CLEAR

Jotun's highest specification zinc rich epoxy primer, containing 90% zinc. Barrier 90 may be used as a first coat on blast cleaned steel. The steel must be prepared to SA2.5 using dry blasting (not water jetting). Barrier can be overcoated in 2 hours at 10°C. 8 packs are available at this exceptional price, as the tins are past the best before date.

From £95.00

10%
Off!

Jotacote Universal is a high build, abrasion resistant two-pack epoxy primer that can be applied at high film thickness. It can be used both as a primer and finish coat.

From £134.95

Over
30% OFF!

Hardtop CA in Base six so can be tinted to various oranges. Available for £54+vat per pack!

From £54.00

15%
off!

Hardtop HB is a satin finish two pack polyurethane topcoat with excellent colour retention. 1 x 5L pack available in Jotun 139 Blue - £46.70+vat.

From £46.70

30%
OFF!

Hardtop Optima is a two-pack isocyanate-free polysiloxane topcoat with outstanding gloss and colour retention. It is available in a wide range of colours and in various pack sizes. The best commercial topcoat available from Jotun.

From £90.95

70%
Off

Hardtop Pro is an isocyanate-free acrylic polysiloxane coating giving a high gloss finish. It offers excellent gloss & colour retention, very good chemical resistance, and easier application with brush & roller. It is a high solids topcoat (65%), and cures down to 0º C.

From £29.95

Save
40%

2 x packs of Penguard Topcoat available in light colours at £30.00+vat each pack!

From £30.00

40%
OFF

6 x packs of Penguard Topcoat available in medium colour tones at £43.60+vat each pack!

From £30.00

over
55% off

Pilot ACR in Base 6 so can be tinted to various oranges. Available for just £25 + VAT per pack.

From £25.00

50%
off

An advanced waterborne acrylic emulsion coating for both interior & exterior use. It is fast-drying, and can be applied down to 10° C. It has a gloss finish, with very good gloss retention. It is certified not to spread surface flames, & meets the LEED v4 requirements for VOC content & emissions.

From £24.95

15%
Off!

Two pack epoxy coating, heat resistant up to 205º C.   Can be applied on hot substrates up to 150º C.

Call for prices

To
Clear

Disposable coveralls available in three different sizes.

From £6.00

To
Clear

Multi purpose, fold flat design. Approved to EN149:2001 FFP3, assigned protection factor 20. Pack of 2.

From £2.00

To
Clear

For use when fully enclosed eye protection is required, gives superior protection to safety spectacles. Approved to CE EN166.

From £1.00

20%
OFF

Masonry Roller & Brush kit comprising: Masonry roller & frame Masonry brush 11" heavy duty plastic tray

From £6.95